FireKing® Commercial Door Operator
FireKing® Commercial Door Operator
Heavy Duty
The FireKing® commercial door operator is designed for FireKing® rolling fire doors that have up to a 60-cycle/hour and greater than a 100-cycle/day requirement.
Features
- Motor: Continuous-duty AC motor with overload protection
- Drive: Heavy-duty worm gear running in oil bath.
- Brake: 24 VDC disc brake standard
- Emergency Disconnect: Emergency hoist for manual operation
- Warranty: 2-year/20,000-cycle limited warranty
Accessories & Options
- Timer Close Module: Timed close set via the LCD display from 2 seconds up to 5 minutes. Includes pre-close warning contacts, timer hold input, auxiliary open input, normally closed safety input, and monitored edge input.
- Auxiliary Output Module: Provides relay contacts at the open, close, and mid-stop limits. Contacts for 5-minute lamp, and “ADA” contacts set via LCD display to warn during opening, closing or both.
- UL325 Listed Reversing Devices: The installation of a monitored external entrapment device is required for momentary contact close operation on all commercial door operators. The following devices, when purchased through Overhead Door, are UL Approved for use to meet this requirement:
- MillerEdge ME/MT/CPT (DC or T3) 2-wire edge sensor. Must be used with TCM (OPABTCGX.S) or Interface Module (OPAKMEIGX.S).